Monday, August 31, 2009

Hiring a Contractor - Vista Handyman

The first question you need to ask yourself when remodeling a bathroom is can you actually do the work yourself or do you have someone that can help you with the remodeling. If you don't know anyone and can't do the work yourself, I would suggest hiring a contractor with experience remodeling bathrooms.

If you can do the work yourself or think you could do the work yourself, why not give it a shot. Any experience you have in construction or home remodeling, is going to be beneficial to your bathroom remodeling project. There is plenty of information on the internet or in your local libraries on bathroom remodeling and these often prove to be great resources for do it yourselfers.

As an experienced contractor I have gathered a great deal of information through books, at work and watching local home improvement shows. The biggest problem with the show's and quite a few of these books, is they don't provide enough information. Most of the time they provide you with the basics of bathroom remodeling and you could soon find yourself in trouble or seeking the advice from a home improvement professional.

The largest benefit for doing the bathroom remodeling project yourself, could be the money you save, along with the satisfaction of completing the project. It makes homeowners feel good when they've completed a large home remodeling project, like a bathroom remodel.

If you don't have the time, lack the experience or a combination of both, I would suggest hiring a contractor to relieve you from the stress and frustration of your bath remodeling project. The more complex your bathroom remodeling project is, the greater the degree of difficulty, the longer it will take to complete the project. Some of these projects can take up a lot of your time.

If you're working on galvanized water supply pipes or old cast iron waste pipes, you could find yourself hiring a plumber to install your bathtub and fixtures. These old pipes create problems for most do it yourselfers and I would suggest hiring a professional, whenever you run into a problem you don't feel comfortable with.

Choosing to tackle some of these difficult problems yourself, could lead to water leaks and more damage to the home eventually costing you even more money than the original cost of hiring an experienced plumber in the first place. When it comes to water, structural framing and electricity, think twice, especially if you're not experienced in these areas.

My advice to do it yourselfers is to hire a professional if you're not comfortable or seek the advice from a contractor or someone with considerable experience bathroom remodeling.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

If your looking for some more House Remodeling Pictures or home building ideas.

How to Install Steam Shower Units

There are many types of steam shower units on the market today, but they all have one thing in common - ease of installation. All of them require a level base in order for the unit to be stable and to ensure proper drainage for the water. The front of the unit, which is typically the door, is the first wall you should connect to the base. The unit comes with the self-tapping screws or bolts that you will need for this task. Once you have this wall in place, you can go ahead and assemble the other walls and attach them to the base.

Detailed instructions come with all steam shower units. Even if you are a person that doesn't like to read directions, these directions are important because different manufacturers have different routes for installing the various units. You cannot assume that because you helped your neighbor install such a unit that the one you have will involve the same process. In some models, you have to apply a layer of silicone around the edges to seal the corners, while other models have rubber seals, which are already in place.

Once you install the walls of steam shower units, then you can put the top of the unit in place. Up until this point you may have noticed that the unit was not as stable as you would like, but once you have the top in place, you will be pleased with its sturdiness. Once you apply the sealant, if it is required, you should tighten all the nuts and bolts and connect all the colored wires.

When installing steam shower units in homes where the plumbing is already in place, you won't have much difficulty connecting the water pipes. The units do come with flexible hoses and water lines, but you do need to make the connections in the wall where you are installing the unit. The drain has to be installed underneath the unit. You may have to make some modifications to the plumbing when remodeling a bathroom that you have enlarged in order to make room for the shower and the steam shower enclosure.

Steam room units must have their own dedicated electrical circuit or if this is not possible, you need to have the bathroom on its own circuit. Check the ground fault circuit interrupter to make sure that it is functioning properly. If it is not you will have problems when you start to operate the steam unit and you will have to make changes in the wiring to protect against electrical shock.

In addition to following the detailed directions for the installation of steam shower units, you so have to look at how your bathroom is ventilated. Ventilation is very important to avoid a buildup of excess moisture from a steam shower or hot tub that could cause dampness, which in turn could lead to mold, mildew and other structural damage. A vent similar to the type you use for your clothes dryer is sufficient for this purpose.

Another similarity in all steam shower units is that you should run the water in them for at least five minutes before you use them for the first time. By doing this simple chore, you can be sure that the water running through the hoses and pipes that come with the units takes out any residue of chemicals that could remain.

Sarah Martin is a native of San Diego, CA and is a freelance marketing writer specializing in home maintenance, improvement, and interior design. For the ideal hot tub or to peruse steam shower units, please visit http://www.mybath.biz/.

A Plan For Home Renovation

You have come to the decision that you want to renovate your home. Maybe you were planning to sell your home and move to a more updated house, but the slow housing market has put a damper on that idea. Or maybe you have been in your home for twenty years and think that a "facelift" is in order. Whatever the reason for your home renovation, you need to have a plan before you jump into the actual renovation process. The following tips can help you navigate your home renovation project.

1. Be prepared to supervise the renovation work. Even though you will probably have a contractor coordinating the various renovation activities, you will be the head project manager. You will need to know how to communicate and act professionally as well as solve problems that arise. Be honest with yourself and decide if you will be able to handle the inevitable stress that comes with home renovation. You can also ask someone else, such as a relative or trusted friend, to help you oversee your renovation project.

2. Plan how you will adjust to the renovation. Depending on how extensive your home renovation project is, you may need to live somewhere else while the work is being done. This is an option for those that want to renovate several areas of their home or the entire home in as little time as possible. If you plan to renovate one area at a time while you remain in the house, you will need to think ahead to how you will manage this. Make sure you know how you will prevent the dust and other debris from settling into your living areas. To avoid becoming overly frustrated, plan on each individual project taking longer than the estimated time. Kitchen renovations will have the most impact on your daily routines, so spend ample time determining your strategies for living with either no kitchen or a partial kitchen.

3. Decide which projects you want to do yourself and which ones you want to hire out. There are some renovation projects that you can easily do yourself or with the help of family and friends. Sometimes homeowners can be a little too enthusiastic and try to complete renovation projects that are too difficult for them. This is especially true for electrical and plumbing work. If you have any doubt that you can complete a project and be happy with the results, hire a professional to do the job.

4. Make sure you have the necessary permits for any renovation work you plan to do. The rules and regulations regarding building permits vary from state to state, so check for building laws that cover your area. If a contractor is handling the project, he or she will be responsible for obtaining any permits, but you may want to verify that all the paperwork is completed on time. If you are part of a homeowner's association, make sure your home renovation does not violate any of the association's rules.

If you fancy some garage doors or any other entrance doors visit the website.

Accurately Calculate the Cost of Bathroom Renovations

No two bathroom renovation projects are the same or cost the same. Even if the same architect built all of the houses in your town, the cost of bathroom renovations will not be the same for each homeowner in that town. There are several things that can impact the cost of your bathroom renovation.

How Big Is Your Bathroom?

Accurately calculating the cost of bathroom renovations is going to start with square footage and floor space. If you are leaving the floors alone, get a good measurement of your wall space. Knowing exactly how much space you are working with will determine what materials you need and how much you can purchase within your budget. Get a ruler or tape measure and write down your findings (numbers are easy to forget). Always err on the high side if you need to make a guess on a measurement. This will help you prepare for the worst.

Choosing Materials

Choosing materials is another important part of figuring the cost of bathroom renovations. Hand-painted ceramic tiles look incredible, but they cost a fortune. To watch the cost and get the look you are going for, try mixing in some expensive accents with more general pieces. The cost of your bathroom renovation can be reduced if you choose one over the other. For example, you could choose the counter top and put it on a less expensive cabinet. You may want to tile the floors, walls, or just the shower walls. Choosing one kind of tile over another, ceramic versus hand crafted, will make all the difference to your cost.

Labor

Don't just go with the first contractor that gives you an estimate. Shop around. Make sure the contractors give you estimates in writing. The estimate shouldn't cost you anything. The estimate should include the cost of labor and materials to be used. Without experience, tackling a bathroom renovation on your own can be difficult. It can increase the cost of your project, your stress level, and the number of things that will need to be corrected.

Not everyone has time to show several contractors their bathroom. If that is the case, there are several online tools you can use to calculate the costs of your bathroom renovation. Just enter your bathroom measurements and materials into the calculator and let it work it's magic!

If you're looking for more information about bathroom renovation or are looking for bathroom remodeling ideas come visit me at my bathroom remodeling blog.

You will find lots of information about bathroom tile design, shower and tub installation, bathroom remodeling tools, bathroom renovation ideas, bathroom remodeling pictures and even specific information about the topic of this article: cost of bathroom renovation.

How to Come Up With a Simple Kitchen Remodeling Plan

Kitchen remodeling is a tough task and it takes a lot of time as well. But if you don't want to get indulged in complications or any extended work, it is also available in simplest of its forms. You can follow simple techniques and come up with a whole new change in your kitchen. And it won't be complicated at all.

For a simple kitchen remodeling project, you need a detailed plan before beginning. Just a plan will not be enough in this case; you also need to have a perfect design for your kitchen remodel. You can get a design very easily and you can also make your own design if you are that creative and remodeling savvy. But a detailed plan means you have all kind of information about your remodel. You need to have details of expenses regarding plumbers, carpenters as well as electricians because all these professionals are essential parts of a simple kitchen remodeling project. Making a detailed plan will save you from a lot of hassle and you will be able to cope with your project very easily.

In addition, you need to make an estimate of total costs of your simple kitchen remodeling project. See your plan find out the prices of all the things that are going to be a part of your home improvement project. But what you are going to need the most is the understanding with your kitchen remodeling designer. Discuss everything with him and make him care for your budget as well as your ideas - putting them aligned together. In addition to designers, also focus on other professionals such as carpenters because they too are supposed to handle delicate work, which puts a great impact to your kitchen.

Once you are done with all these basic requirements, you are ready to call a contractor and get things rolling for a simple kitchen remodeling project. However, you also need to be aware of complex kitchen remodeling project, designers, contractors and latest ideas that can help you out in your projects. All these things result in betterment of your kitchen.

For further details on kitchen remodeling projects and things that make it efficient, you can always visit http://www.theyarelocal.com/articles/remodeling/kitchen_remodeling/index.php.

Sunday, August 30, 2009

Patio Roofing - Poway Home Remodeling

If you're looking for patio roofing options, you've come to the right place.

First off, if you're at the design stage of the project, you are best served by putting the patio under the main roof of your home. Typically, that would have a sloped roofing system such as asphalt shingles. This strategy eliminates low-sloped roofing products entirely, along with their high cost and relatively short life.

If you are adding a patio, avoid the type of lightweight metal roof panels that are typically attached to manufactured homes for carports and such. Not only are these products vulnerable in high winds, they won't withstand foot traffic. And if you can't walk on it, you can't service it when needed.

But there is a structural metal panel that words pretty good for patio roofing. It is a composite of polyurethane foam that is sandwiched between two layers of aluminum. The foam provides insulation and the panels can withstand some foot traffic. To be safe, I walk on plywood when working on this type of roof to distribute my weight.

Moving onto a more conventional option for your patio roofing, the most important thing to remember is that you need to have positive drainage. This can be accomplished with a slope that is as low as 1/4" per foot. If you don't have it in the structure, install a tapered system between the roof deck and the roofing. Almost any low sloped roofing system can succeed with proper drainage. Virtually none will succeed without it.

For over a hundred years, the traditional choice for low-sloped roofing has been a built-up roof (BUR) with gravel surfacing. The multiple layers of felt, each set in a layer of hot asphalt make for a thick, heavy-duty roof system that is tough to beat. But this type of roofing is on the decline due to the hazards associated with hot asphalt. Insurance companies are demanding outrageous deductibles for hot tar accidents, which is cooling the market for BUR, especially on small residential jobs.

A popular alternative for patio roofing is torch-applied modified bitumen, or just "modified" as it is commonly called. It is a rolled roofing product that is specially formulated to accommodate temperature changes. Unfortunately, the torch application can easily start a house fire... and often does.

There is a family of plastic and rubber roofing products called "single-ply" that can be installed without torch or kettle hazards. But the inherent problem with single-ply roofing is just as the name implies: There is just one layer of waterproof protection. Something as simple as a dropped tool or a discarded cigarette butt can cause a leak. And if there is any ponding at all, the seams must be PERFECT to prevent water intrusion. Perfection is a lot to expect from anybody, including us roofers.

Fortunately, there is an excellent option for your patio roofing. It's a hybrid that combines the best features of two different systems. It starts with a nailed down base sheet over a tapered roof deck. Then a smooth-surfaced, self-adhering mid-ply of modified bitumen is installed. Finally a self-adhering modified cap sheet with white granular surfacing is installed.

This system gives you the back-up protection of a built-up roof and the flexibility of modified, without the dangers of torches and kettles.

For more information on these patio roofing options, check out Chapter Two of "Roofing Secrets: How to Avoid Leaks and Save thousands of Dollars!" by John C Bishop.

For details, go to: http://www.roofingsecrets.com

Tips For Planning a Small Bathroom

Adding an additional bathroom can greatly increases the value of any home, and can be a huge advantage to a growing family. How do you proceed when you don't have much space to put a new bathroom in? Even the smallest bath can feel idyllic with careful planning. Whether you are building from scratch or re-modeling, a few helpful tips will get you on your way through the planning stage.

The first step is choosing where your new bathroom will be placed. Build as close as possible to the existing utility and plumbing lines, and you will save yourself major plumbing expenses. Consider who needs to use the room, and how accessible it will be to them in that location. If the bathroom will not have a window, you must be able to install one, or install a vent to the outside of the house to remove humidity and prevent mold and mildew. Check your local building regulations before you plan too far, so you won't have to go back and change plans later.

Next, decide exactly what needs the addition should fill. If you don't need a bathtub and a shower stall, don't install them both! If you do need both a bathtub and a shower, look into a combined unit that will fit both functions into one space. Look for furniture that multitasks, and personalize this bath to your households needs. A large family has different needs than a single person, and this is an excellent time to create an area to perfectly custom fit your life and your home. Maximizing the functionality of a small room increases its value to you beyond the financial value added to your home.

Take precise measurements of the space. You can create a template of your proposed bathroom using graph paper or a simple computer program. Try different arrangements for a bathroom suite and furniture using standard size measurements. If you are unsatisfied with how it comes together, check local suppliers for more unconventionally sized pieces. A smaller bath or shower enclosure may make a perfect fit. Likewise, corner units are available for bath, shower, basin and bidet that can make the most of the floor space in even the tiniest bathroom.

How's your hardware? Short spout taps in both bathtub and basin won't overwhelm a smaller unit or get in your way when you use it. Choose towel rails, wall sconces, and storage solutions that hug the walls and don't break up the visual space. Now add the elements that make this space "You" - color, texture and decorative accents.

Planning to make any area, most especially a small one, as functional as possible gives you a much greater chance to express your personal style in that space. With a little forethought and planning, the smallest of bathrooms can become a luxurious haven.

Written by James Chapman, a director of Bella Bathrooms Ltd who supply Small Bathrooms across the UK.

Bella Bathrooms is an online retailer formed by 2 plumbers from the North East of England. Having hands on experience of custom bathroom installation and products has enabled Bella Bathrooms Ltd to only select quality bathroom products for their online shop. They sell bathroom furniture, bathroom suites, showers and bath related products for consumers through the United Kingdom.

Sheer Curtains

To highlight big windows and soften the sun's rays, a sheer curtain is your best option. Sheers have been used for many years. Besides their practical use, sheers will also add character to your room.

This lightweight curtain can be used alone or with another heavier fabric. The usage depends on the amount of sunlight you want to let into the room, for instance, if you want a warm room with lots of sunlight flooding in, you would use only the sheer curtain. If you decided to go only with sheer, you could make them three times the width of your window. The gathers will give you your privacy.

You could also get a little creative and leave the top part of your window open. You will still have your privacy but at the same time, the sunlight entering from the top of the window will brighten up your room dramatically.

Sheer curtains are the perfect choice if you have indoor plants, especially orchids. This curtain will protect your plants from the sun's rays yet give them enough sunlight to keep them alive.

Sheers are cheap to buy and relatively easy to maintain. Most of them are made of synthetic materials and unless otherwise stated, you can wash them just as you would wash lace curtains.

If your sheers are dirty, soak them overnight (not more than 12 hours) in warm soap water with a couple of spoonfuls of borax or ammonia. After this, rinse them thoroughly to get rid of the soap and hang them out to dry. If you have organdy sheers don not wash them at home. They are very delicate and detergents will harm them. You will have to dry-clean them.

Curtains provides detailed information about curtains, window curtains, kitchen curtains, beaded curtains and more. Curtains is the sister site of Candle Chandeliers.

A Few Home Improvement Ideas to Increase Your Home's Value

Would you like to increase the market value of your home? A few home improvement projects will offer a return when you sell your home, but many home improvement projects will not provide much of a return on your home improvement investment. Pick your home improvement projects wisely and if you do take out a loan to complete your project, do your homework first and be sure that you have a good chance to recover the cost of the project when you decide to sell your home.

Kitchen remodeling is a great way to add value to your home. Upgrading your appliances, replacing door and cabinet handles and painting walls can add new life to your kitchen plus add value to your home. Kitchens sell a home, so remodeling a kitchen should be a first choice for a home improvement project. Sometimes doing it yourself can save money, but consider hiring a professional for the large jobs. The top five kitchen remodeling projects which are recommended by Realtors are painting, cabinet refacing, new counter tops, new floors and a modern cook top range.

A bathroom remodel is second only to kitchen remodeling in terms of getting the most return on your home improvement investment. A bathroom remodel can often mean making the most of your current space, by upgrading fixtures, flooring and lighting. A few inexpensive ways to make your existing bathroom more beautiful and appealing include upgrading your cabinets, counter tops, sinks, tile or your tub and shower. However, if you do decide to add a new bathroom, it is going to increase the value of your home.

Kitchens and bathroom remodeling are both excellent choices when you want to increase the value of your home. Kitchen and bathroom remodeling projects are the best at recouping their cost and adding to the resale value of your house. The average return on a bathroom or kitchen remodel is 100-105%.

Increasing the curb appeal of your home is one of the simplest and inexpensive ways to increase the value of your home. Applying a fresh coat of paint can make the inside of your home appear more appealing to potential buyers, which could mean a quicker sale. Neutral colors are a good choice when you are preparing your house to sell. Neutral colors will blend in good with a variety of other colors and can make a room look more open and appear larger.

Your roof is one of the first impressions people have of a home. With proper maintenance, a high quality roof should last a very long time. A new roof won't add a lot of value to your home, but it will help prevent the types of repairs that can result from water leaking in from your roof.

If your carpeting or vinyl flooring is beginning to show signs of wear this can adversely affect the appearance of the whole room and detract from the value. So replace the carpeting in rooms where the wear is severe to help increase your homes value. Often, a good carpet cleaning is all that is needed.

Naturally, you can only make the home improvements that your budget will allow. But many of these suggestions that I have discussed are not very expensive . All of them however will enhance the appearance and add value to most homes.

Remember that with any home improvement project moderation is the key. Don't go overboard. Focus on improving two or three areas in your home which need the most work.

Copyright (c) 2008 Smoky Mountain Painting

The author has over thirty years experience in the home improvement industry and is the owner of Smoky Mountain Painting in Pigeon Forge Tennessee.

Estimating the Cost of Building a Basement

There are many things to think about before building a basement. One of the most important thing is the cost to build it. Here are a few tips to help you estimate your construction costs.

Excavation

The first thing you need to think about is the cost to excavate the soil. The harder the soil is to excavate, the more expensive it will be. Of course, the depth of the excavation also affects the cost. The deeper the digging the higher the price.

Concrete

The size and shape of your basement will greatly affect your budget for building a basement because they will determine how much concrete you will need for your project. The more complex your perimeter structure is, the more you are going to spend. You will also spend more for deep basements because they will n need higher and thicker walls. You should also include your basement foundation in calculating your building cost.

Reinforcement

Reinforcing your basement walls is very important. This will allow your basement to easily support the load on top of it. Reinforcing the walls will also strengthen it from the constant pressure it receives from the soil around it.

Backfilling

It is highly recommended that you backfill the perimeter of your basement and its bottom. Backfilling will secure your basement from absorbing water or moisture. Since concrete easily absorbs water, backfilling the exterior of your basement will prevent this.

Drain Tile

Installing a Drain Tile to the foundation of your basement should not be forgotten. The Drain Tile will keep you r basement dry by diverting ground water away from it. Other things to consider when building a basement are labor costs, equipment rentals, finishing and of course your building permit.

Considering building a basement? Discover practical basement remodeling ideas online and turn cheap basement ideas into dream basements at a budget.

Basement Remodels Need Careful Consideration

There are many important things that you need to consider when you decide to work with basement remodels. The decision to renovate and remodel your basement can be done by yourself, but unless you have all of the latest tools, legal requirements and construction talent, it is much better in the long run to hire a professional basement contractor to do your work.

You need to first realize that your house was not originally constructed to handle extra additions that a remodeled basement might require. Such things as; the structural modifications that might be needed, the air flow in the basement room area, the heating and cooling system and the costs of these basement remodels.

Choosing a competent basement remodeling contractor should be your top priority. This is one of your first decisions when you decide to remodel. The right choice will make a big difference in the quality of remodeling and cost of your project. There are many ways of selecting a good competent contractor. If you have friends that have undertaken a project like this they are good references. You can go on-line to find contractors in your area.

When you have gathered information in the selection process of your basement remodeling contractor, it is very advisable to select 2 or more and ask them to submit bids on your basement project. This will aid you in, not only getting a competitive price, but if they know they have competition in your basement remodels they will know you are serious in finding a good competent contractor.

Having some basement remodels? Discover practical basement remodeling ideas online and turn cheap basement ideas into dream basements at a budget.

Clawfoot Shower Curtain

Many people that are building or remodeling their bathrooms have made the decision to use the clawfoot bathtub. While many people enjoy the sit down bath, a lot of people would rather use the stand up shower. It is now possible for you to have the best of both worlds. The clawfoot shower tub allows for the transformation of any design of clawfoot bathtub to become a shower as well. The clawfoot bathtub of any design, from the antique clawfoot bathtub to the newer acrylic clawfoot bathtub can use the shower enclosure set. This is great for the times when you are in a hurry and do not have the extra time for the the relaxing, soaking bath that the clawfoot tub allows.

To turn one of the clawfoot bathtubs into a clawfoot shower tub, the shower tub enclosure set will have to be installed. The enclosure set usually will include the shower, the enclosure ring and the enclosure ring fittings that allow you to hang the enclosure ring. Many of the shower curtain enclosure manufactures offer a few simple instructions for hanging the enclosure ring so it will be the right height.. First, hold the curtain with a few of the curtain rings attached on the shower curtain to help determine where to install the clawfoot shower bathtub. This will help you to determine where to hang the shower curtain enclosure.

Most of the enclosure sets do not include the shower curtain or the shower curtain rings. But the industry has realized the need for a shower curtain to fit the enclosure ring. It was necessary before to use three or four different curtains to close up the tub. This lead to several different problems. First the unsightly seams was a bother and also unpleasant to look at. The seams would open and allow water to escape to the floor, causing the person to have to clean up the mess or have damage to the floor over a period of time. Also the gaps of the seams would allow for the drafty cold air also.

The enclosure curtains can be purchased along with a wide variety of shower curtain rings. There are many different styles and finishes to help you to match your own personal decor. Also do not forget to look for the different accessories to help finish to complete look of the bathroom. Items like a soap dish or even new clawfeet are available. Even items like the feet coasters are available.

The use of the clawfoot shower tub will allow for the complete use of the clawfoot bathtub experience. Along with the clawfoot shower curtain, now you can enjoy the best of the sit down baths when you have time but also the stand up shower when you are in a hurry.

Saturday, August 29, 2009

What You Need to Know When You Design a Screened Porch

Respected scientists have, through painstaking research, discovered that a single mosquito can lift 10 times its own weight. This means of course, that it takes a mere 11,253,534 mosquitoes to grab, lift, and fly away with an average-sized toy poodle.

Alarming as that may seem, it is not nearly as scary as the fact that 11,253,534 is also the exact number of mosquitoes contained within a cubic meter of mid-summer air found in the typical Midwestern backyard. Which is precisely why those same respected scientists invented the screened porch.

In temperate climates, flying insects can make the enjoyment of warm summer nights very difficult. Americans spend a great deal on money on various methods of repelling the buzzing vampires. We spend even more money on decks and patios only to find their use limited by the local bug population. And that's exactly why so many homeowners make a screened porch an indispensable part of their house.

My clients often ask me whether a screened porch or a "Florida" or "three-season" room is more appropriate for outdoor living in the Midwest. They're very different kinds of spaces; a three-season room is much more than just a screened porch with windows.

Building codes typically require any enclosed space that is capable of being heated and cooled to meet all of the requirements of indoor living space. That means going beyond basic structural stability: a room enclosed with walls and glass must be insulated, heated, provided with adequate natural and/or artificial lighting, fitted with the proper number of electrical outlets, and meet mechanical energy codes.

A screened porch, however, is considered to be outdoor living space and need only be structurally sound. As long as it isn't high enough off of the ground to require a railing, few other code demands are made. There's a cost difference, too, since a screened porch requires fewer trades and far less material to build. It's a relatively cheap way to add living space and extend the enjoyment of your yard and garden into the spring and fall.

But the true delight of a screened porch is the feeling of being outside, without the rain, blazing sun, or bugs. That's an experience that isn't felt in even the most highly glazed "Florida rooms". It's a common mistake to overdo a screened porch, to add more columns than necessary or to install a half-height wall around the perimeter. Anything that creates physical or visual separation between the inside and outside erodes the illusion. The best screened porches are as transparent as possible.

Finding just the right location for a screened porch can be tough, especially on narrow suburban lots. In most cases, the screened porch should be connected to another family gathering area and close to the kitchen, with views of a yard or garden. But how to do that without blocking the views from other rooms? Again, transparency is the key. Make the screens as big as possible and the ceiling high, add a skylight or two, and you'll still have a good view from inside the house.

Materials for a screened porch should be chosen first for architectural compatibility with the house, and second for durability. If the porch is to be painted, make sure to choose a species and grade of wood that will hold paint well. Cedar, redwood, and other Western softwoods are excellent for paint adhesion. Cedar and redwood are also known for their natural resistance to insects and rot.

Other options for the porch's frame include pressure-treated lumber and several recently introduced simulated wood products made from varying proportions of post-consumer recycled plastics and waste wood fibers. These "polymer-lumber" materials offer excellent rot and insect resistance, and eventually weather to a pleasing gray color.

The screens themselves can be made of metal or plastic screening. Plastic screening is usually the best choice, offering rust resistance, light weight, and durability. And although the screens can be attached directly to the porch frame, a "pre-framed" screen system allows for easy replacement and cleaning by simply removing the entire screen and frame as a single unit. A local screen contractor will measure the existing openings and build the pre-framed screens to fit.

A well-designed and well-built screened porch adds value, function, character, and enjoyment to a home. It can get you a little more in touch with the outdoors, and give you another reason to keep the garden weeded. It can also get the bug zapper out of your yard -- and save you a small fortune on citronella.

Richard L. Taylor, AIA is a published author and recognized expert in Residential Architecture. He is President of Richard Taylor Architects, a 5-person firm in Historic Dublin, Ohio. Residential Architect | Luxury Home Plans

RV Tips for Holding Tanks

Today we're going to talk about RV holding tanks. To start with, I wanted to mention something about RV holding tanks that I don't think a lot of RVers are aware of. Many of the free dump stations available to RVers are closing because of chemicals that are harmful to septic systems and because RVers are abusing these dump stations. If we want to have access to these dump stations it is absolutely essential that we use septic safe chemicals (no formaldehyde), and that we clean up after ourselves and do not abuse dump stations.

Your RV has what is referred to as a gray water holding tank and a black water holding tank. The gray water holding tank collects dirty water from the kitchen sink, bathroom sink and shower. The black water holding tank is for the toilet. These tanks terminate into one main outlet used to empty the holding tanks. This is where we connect our sewer hose.

Make sure you have the required couplings and connectors. It may be necessary to attach two hoses together to reach the sewer connection. I recommend you only use heavy duty sewer hoses. Their not that expensive and they hold up much better. Keep a 10 foot hose and a 20 foot hose available. Do not pull or drag the sewer hose on the ground. This will cause it to tear or get pin holes in it.

To hook up the sewer hose make sure both valves are closed and remove the sewer cap. Make the connection by putting the hose adapter over the outlet and turn it clockwise until it locks securely in place. Take the other end of the hose over to the campground sewer connection. Use the necessary adapters to make the connection and get a good seal. It's a good idea to place some weight over the hose so it doesn't jump back out when you drain the tanks. It may be necessary to use some type of sewer hose support to get a good angle from the RV to the campground sewer connection so the tanks drain properly when you empty them. The small valve is for the gray water tank and the large valve is for the black water tank.

One golden rule for RV holding tanks is to never dump the black water tank until it is at least two thirds full. You want the tank nearly full so the weight and the gravity will force the contents of the tank to drain properly. Another golden rule is to never leave the black tank valve open at the campground and expect the toilet to drain or flush like the toilet in your home. It won't work.

When the tanks are full, or nearly full always dump the black tank first, followed by the gray tank. The gray water tank should also be at least two thirds full. Dumping the gray water tank last will help to flush the sewer hose out.

When you're at the campground for an extended period of time you can leave the gray tank valve partially open so it drains as you use it, but remember to NEVER do this with the black tank. If it's time to leave the campground and your holding tanks are not full you can finish filling them with water and then dump them. Never use your drinking water hose for holding tank maintenance or cleaning purposes. RV drinking hoses are normally white. Take a different color hose for others uses so you can distinguish the difference.

After you dump the tanks you need to thoroughly flush the tanks out. Some RVs have a built in system for flushing the tanks out. If not there are other ways to do it. You can use a tank wand designed for cleaning and flushing the black tank. The only problem is you don't know when or if the black tank is really clean and you can't rinse or clean the gray tank with a wand. I use a product called the Flush King. It's a reverse flush valve that connects directly to your sewer outlet and rinses and cleans both holding tanks in one simple operation. It's easy to use and it has a see through barrel so you know when the tanks are really clean.

Every time you dump the black tank you need to treat it with holding tank chemicals to assist in controlling odors and to break down solids. You should always use environmentally safe chemicals. Enzyme based chemicals use the good bacteria to digest waste and control odors. Formaldehyde based chemicals destroy the bacteria that's needed to break down waste and they can be dangerous to humans and pets.

The first step is to add enough water to completely cover the bottom of the tank. Four or five toilet bowls full should be enough depending on the size of your black tank. Water will assist a great deal with controlling holding tank odors. You always want the contents of the tank to be covered by water. Next, fill the toilet bowl and add the proper amount of holding tank chemicals, usually four ounces for every forty gallons the tank holds. Flush the toilet. Repeat this procedure every time you empty the black water holding tank. Some holding tank chemicals like RV Trine also contains valve lubricants to keep the valves operating properly and extend the valve seals life.

You should always use toilet paper designed for use in RVs. This toilet paper breaks down and dissolves in the holding tank chemicals preventing potential problems with the holding tank, the RV sewer system and the dump station septic system.
False holding tank readings on your monitor panel are caused by the holding tank probes being covered by toilet tissue or other debris. If flushing the tank doesn't solve the problem add some water and a couple bags of ice cubes to the empty holding tank. Drive or pull the trailer so the ice cubes can scrub the sides of the tank. Proper holding tank chemicals will also keep the holding tank probes clean.

Over time grease and residue builds up in the gray tank and it causes a foul odor, not to mention how it is affecting the tank and valve assembly. Periodically treat the gray tank with environmentally safe holding tank chemicals to avoid odors from the tank. When the tank is empty you can also add some dish washing liquid down the drains to help break down grease and residue build up.

Following these simple holding tank tips can prevent problems and provide you with long lasting trouble free holding tanks. This is one problem we can all do without! All of our RV walk-through videos cover information on RV holding tanks, the water system, LP gas system, electrical system and more. Check out our new RV Essential Items DVD to show you what items you will want for your RV to make all of your RV experiences more enjoyable.

Happy Camping,

Mark J. Polk

Copyright 2006 by Mark J. Polk owner of RV Education 101

RV Expert Mark Polk, seen on TV, is the producer & host of America's most highly regarded series of DVD's, videos, books, and e-books. http://www.rveducation101.com/

Mark Polk is a retired U.S. Army Chief Warrant Officer Three, specializing in wheeled and track vehicle fleet maintenance operations. In addition to owning and operating RV Education 101, (based in North Carolina) since 1999, Polk also has a very extensive RV background working in RV service, sales and management. Polk has a degree in Industrial Management Technology and his 30 plus years of experience in maintenance includes working as an RV technician, a wheeled vehicle and power generation mechanic, an automotive maintenance technician, Battalion and Brigade level Maintenance Officer, an RV sales manager and also in the RV financing department as the Finance & Insurance manager. http://www.rveducation101.com/

Temperature Control with Solar Panels

While solar energy is most often associated with the production of electricity, heating is also a major platform. Temperature control is the key to an efficient system.

Temperature Control with Solar Panels

The sun produces a ton of energy, but solar panel systems have historically been very inefficient at converting it. With improving technology, efficiency has improved to the point where most panel systems can easily produce enough energy to heat water for the home and pools. Obviously, controlling the heat production is a key element of this process.

Solar heating control systems come in a variety of forms. Most are designed to work on temperature differential strategies. Temperature differential controls work by using two sensors. The first is located close the panels being used to heat the water or liquid substitute. The second is located on or close to the liquid return valve into the panel system. Put in practical terms, one sensor measures the temperature of liquid set to leave the panel while the other measures the temperature of liquid coming into the panel.

The process works by waiting for temperatures to rise to a temperature determined by you. Once the liquid meets the temperature, the sensors trigger a computer to turn on the circulation pump and move the liquid to the desired location. Once the return valve sensor notes the temperature of the returning water is within a particular range of the liquid in the panel system, the pump is shut off.

Controlling temperature and efficiency is important in any heating system, but particularly in solar platforms. Although particular designs may vary from the above description, they all serve an important function. By regulating temperature, controllers make your panel system much more efficient. Pump use and abuse is cut down and temperature increases are quicker.

Solar solutions are coming to the front of the energy debate for many residences. Countries like Germany are making huge investments in solar platforms and technologies. Solar can be a cost-effective solution for you as well. Just keep in mind that efficiency is a must if you are pursuing solar water heating.

Rick Chapo is with SolarCompanies.com, a directory of solar energy companies. Visit us to read more articles on solar power and solar heating controllers.

EIFS - How Synthetic Stucco Can Cause Huge Damage to Homes Across America

IF you have EIFS on the exterior of your home, you likely have significant water damage all over your home and may not know anything about it.

The acronym "EIFS" stands for "Exterior Insulation and Finish Systems." Most people call it "stucco," although it's not true stucco. It's synthetic stucco. In this article, the terms EIFS, stucco and synthetic stucco will all be interchangeable.

There was an article in the Atlanta Journal Constitution on November 4, 2008 about Post Properties, headquartered in Atlanta. Post owns apartment complexes all across the USA. Post will spend $40 to $45 million dollars repairing over 11,000 apartments that have water damage due to improperly installed EIFS.

"This is a construction method that was prevalent in the 90s. We don't use it anymore," David Stockert, Post's CEO and president, told analysts Tuesday. Stockert also said that very little of the damage will be covered by insurance.

$45 million is just a drop in the bucket compared to the damages to single family homes across America that are covered with synthetic stucco.

Over the last twenty years, MILLIONS of single family homes were built using stucco as the exterior finish. Stucco looks great, is easy to install, has great energy-saving features and can be made to look like stone and other masonry finishes.

However, in my own experience as a claims adjuster, I've seen very little residential stucco that has been installed properly. Nearly every EIFS-clad house I've ever inspected had water, mold and termite damage behind the stucco. Sometimes the damage is so extensive that the houses have to be condemned and torn down.

I spent lots of time handling claims for Construction Defect liability that involved stucco. I don't know of any single building material that has been responsible for more builder bankruptcies in America than stucco. And, as the stucco product ages, more and more home damages are being discovered.

I remember inspecting a huge, three story wood framed, stucco exterior home in a golf course community in Athens, Georgia a few years ago. The owners discovered the damage when the wife walked over to a dining room bay window and her foot fell through the wood floor.

There was water damage on all four sides of the house, and around every door and window opening. Worse, the water behind the walls made the perfect breeding ground for termites that had been eating the house for a long time. The estimate I wrote was for $439,000, and the home was valued at about $500,000. The house was demolished and rebuilt on the foundations. The builder's liability insurance paid the claim. The new house DID NOT have a stucco exterior.

EIFS manufacturers issue shop drawings that builders are supposed to use when installing EIFS. They specify that flashing must be used around ANY door or window opening. "Flashing" are formed metal pieces that keep the water from getting behind the stucco. But in millions of homes, the builder simply butts the stucco up against the outside of the window or door, smears on the stucco finish, and seals the joint with caulking. It saves installation time and the cost of the flashing.

It doesn't take too many months for exterior caulking to crack and separate. Once that happens, water gets behind the stucco every time it rains.

So, when water gets behind EIFS, it gets trapped. Lots of homes have a layer of "housewrap," or plastic sheeting as a vapor barrier under the stucco. But vapor barriers that keep moisture out also keep moisture in. When water gets trapped behind the EIFS, it creates the perfect habitat for termites...food and water. They'll stay until the food and water run out.

Termites can destroy a home unprotected by pesticides. However, termites can also damage or destroy a protected home. Termites only need THREE THINGS TO THRIVE:
1. Access...a way to get in.
2. Moisture to drink.
3. Food...which in an average house is wood. Walls, floors, plywood, trim, windows, doors...all wood products are on the termites' menu.

The other big problem for stucco is that builders ran the product down the side of the exterior wall and then landscaped up to it. Stucco that comes into contact with the ground makes it super easy for termites to invade without detection.

Why am I telling you this about your stucco-covered home? Because your damage will likely NOT be covered by your homeowners insurance policy. Wet Rot is excluded in your homeowners policy. The standard HO-3 policy also has exclusions for damage caused by insects. The policy also excludes damage caused by mold and mildew, commonly found where the water damage is.

I urge you to have a home inspector or contractor inspect your home. Look carefully at the outside trim around your doors and windows. If you cannot easily see a metal flashing between the stucco and the door or window trim, your stucco was improperly installed by the builder. The chances are overwhelming that you have interior water damage all over your home.

The final insult is that you likely can't sell your home without making the repairs first.

If you find damage, and your insurance company denies coverage for your damages, you'll have to notify the builder who built your home that you're making a claim against his Liability insurance policy. I recommend that you consult an attorney as you begin the process.

EIFS, improperly installed on ANY building, causes nothing but nightmares and financial ruin. Don't be a victim...find out your rights and fight hard!

Now, I'd like to offer you two special reports at no cost. One is "5 Things To Do When Shopping For Car Insurance," and the other is "5 Things To Avoid When Shopping For Car Insurance" Each one is a $9.95 value, but free to you when you sign up for my newsletter at the website address below

P.S. WARNING!! Do Not Buy Insurance, or Submit an Insurance Claim Without Visiting This Website!

check out: http://www.insurance-claim-secrets.com

My Book is NUMBER ONE at Amazon.com in its category! Buy it Today!

Nominated for Georgia Author of the Year Award 2008

Finalist, USA Book News "Best Book Awards 2008"

My blog is at: http://insurance-claim-secrets.blogspot.com

Which Shower Will Be Better For Your Home?

If you're planning to buy a shower for your home but do not have any idea on what type and design is suitable for the plumbing structure of your house, do not worry. This article will help you in knowing some features of modern showers and in making a comparison among the different types of showers that are widely used. Definitely, everyone would like to have a shower of good quality that operates well and can add beauty to the bathroom.

Before installing a shower, there are several things to consider and questions to answer before one is guaranteed of a wise investment. The design and area of the bathroom must first be considered among other things. Others things may include:

-Budget for the shower and installation cost.
-Any previously installed heating system.
-Pressure provided by the main water supply.
-Is there any existing system providing hot and cold water?
-Is the electricity suitable for electric showers?

Answering these questions can help you find the most suitable type of shower for your home. The next section contains a list of different types of showers to aid you when choosing the features you are looking for.

Electric shower:

Electric showers have become more popular these days because of the convenience it offers. Electric shower is directly connected to the main water supply and must be connected through a 10 to 15mm water pipe. To ensure reliability, it is recommended that an isolation valve must also be installed. The water pressure at the main entry should be at least 1 bar.

Before the installation, it is necessary to check the capacity of the electric fuse. Electric fuse above 60 amps is recommended. Fuse, switch, and cable should also be considered when installing the system. A10 mm cable will be appropriate. In all cases electric circuits must have a double pole switch used to turn the electric shower on and off for daily use and emergency purposes.

Mixer shower

Mixer showers are designed to mix hot and cold water in a special valve where the desired temperature is regulated before reaching the shower head. Such showers are compatible on both high and low pressure water source. There are two types of mixer showers: thermostatic mixer shower that can maintain water temperature in a selected degree and manual mixer shower where water temperature is determined by the flow of water. The rising and falling of the water dictates the water temperature.

Today, thermostatic mixer showers are a lot cheaper making it affordable for everyone to own. A disadvantage when using mixer shower is the design of the installation. It is connected to other point from the water supply. Sharing the water in various points will change the water temperature dispensed by the shower.

Power shower

Power shower is a modified mixer shower that has an integral pump that maintains the pressure of water and helps increase or decrease the force of spray through shower head. This type of shower can be installed even with low pressure water supply.

Choosing the best design to suit your needs will definitely give you the best return of investment. Not just that. A well designed and suitable shower will enhance the look of your bathroom adding relaxation and warmth on every bath.

If you are looking for more information then feel free to visit electric showers and electric power showers.

Friday, August 28, 2009

Iron Gates - As Good As It Gates

Gates are pretty simple they must allow anything that is worthy of passing through and must block anything that is not. And it can't get any simpler. That is why, today, we design gates that do just that or probably a bit more. Just the thing that must be kept in mind is - that they must be sturdy. So sturdy that a gate is a guard, all by itself, all the time.

When the matter comes to sturdiness, there is, probably, no element to match the goodwill of iron. Iron gates have been in use since ages. And they will be, until a better element is discovered. Iron gates are made, pretty obviously, of iron. The choice of iron is made because of its sturdiness, ability to resist weathers of any season, and its visual beauty. Iron gates stand all extreme conditions and come out as winners all the time.

Cast iron is obtained by melting pig iron, along with considerable amounts of scrap steel and scrap iron. Various steps are then taken to remove any unwanted contaminants like phosphorus and sulfur. Later on, other elements are mixed into the melt before finally obtaining a form that is a produce of casting. This process, as is obvious, provides iron of a very superior quality. Such superior quality reinforces the trust needed to build iron gates. Due to its low melting point, excellent match inability ,cast ability and good fluidity, cast irons are famous with a wide range of applications, that include gates pipes, car and machine parts. Nowadays, cast iron gates are a common sight everywhere.

Wrought iron is commercially pure iron, with a tiny amount of carbon , but it generally contains some amount of slag. Wrought iron gates can be easily welded together and are very tough, malleable, and ductile. This however comes with a price. Wrought iron is quite soft, and hence, wrought iron gates are not a common sight today. Wrought iron is so called as it is wrought from a mixture of porous iron contaminated with slag. Wrought iron is not as strong as compared to its counterpart and is, hence, less used than cast iron. Although there may not be a visible difference between the two different types of irons, their differences in sustaining various conditions are obvious. Hence care must be taken in deciding upon the type of iron to be used for the iron gates. Generally, wrought iron scores a couple of brownie points over cast iron in terms of endurance.

Gate fences too are similar in nature they compliment the iron gates. Gate fences provide added security and more power to the iron gates. Generally gate fences are made out of iron, although whether to use cast iron or wrought iron solely depends upon the owner. Both cast iron and wrought iron gate fences are a common sight. These Iron Gate fences are generally barb-wire fences that are put around the iron gates to provide extra level of security.

Rob Hargreaves - An American Locksmith, living and working in New York City, for NYC Locksmith company - Mr-Locks Inc. To learn more about iron gates and other types of security gates - please visit: http://www.mr-locks.com and browse through our catalogue of iron work, call or email for additional inquiries about Iron Gates.

Bathroom Floor Tile - 100% 'Nature Made' Remodeling!

If you look for an easy to use tiling method try Bathroom Floor Tile remodeling - it provides an easy coating technique that enables you to virtually decorate any surface at home. These natural tiles offer countless remodeling ideas and possibilities whether in the inside or the outside. Searching for new ideas that will help you on transforming your home contemporary and luxurious? Read this article.

Overview

Before you plan on using this tiling method it is important to understand how it works - Bathroom Floor Tile redecoration is made of unified decorative natural stones fixed onto a sq/ft mesh backing. The seashores of S. East Asia are rich with these flat pebbles, and indeed most of these tiles are originated from that part of the world. Practically, it enables you to coat any desired surface you choose: Bath walls, shower bases & backsplashes, kitchen backsplash, countertops, patios, pool surfaces, decks, and fireplaces.

Main advantages

Now that we understand how it works, we need to know this technique's main benefits:

* Easy to be replaced if needed.

* Quick & easy installation that doesn't require any special skills or professional background.

* Durable to any extreme temperatures such as around fireplaces and stoves for example.

Helpful advices!

* Order a small sample of the desired tiles prior to making a complete order - just to make sure it answers your expectations.

* When you prepare the grout avoid adding too much water in the initial mix - that additional water can result in weak grout that can flake.

* If this is the first time you install these tiles, it is recommended to learn from other's experience - there are plenty of forums and demonstrational videos on the internet where you can find useful information about first time installation.

There are probably many other great benefits provided by this effortless home improvement option simply because once you explore and understand how it works, you quickly find endless redesigning opportunities that could fit any space at home.

Final words

For an average user Bathroom Floor Tile installation is quite fast and requires no more than several hours (pending the size of the coated surface). As mentioned earlier installation is quite easy, however, it is advised to keep the above advices just before you start installing.

Get creative! - Learn more about how you can easily decorate any surface at home or in the office with Bathroom Floor Tile.

Visit: http://www.homepebbletiles.com

Interior Decorating Ideas

It's happening again. The styles and fashions that we thought we'd seen the last of a decade ago are re-emerging as the latest thing in chic design and people are going mad for it. In fact, one of interior furnishings mainstays throughout the eras has been the humble lamp and while bench surfaces, chairs, lounges and most other room items have gone through drastic changes, many of the retro lamps that emerged in the 1950s and 60s are still preferred today.

The great thing about decorating in retro style is that almost anything goes, as long as it is fun, combines shapes and colors and looks unique. Floor lamps such as the Arco lamp that reaches from one side of the reading chair to the other still looks appropriate, as does the square lampshade on a wooden pedestal base. From there it's up to your own discerning eye as to how funky you want to make the lamp shade with options of trimmings, tassels or prints to bring out your retro preference.

The great thing about deciding on a retro lamp is that if you don't particularly like the look of the traditional lamps from the era, you also have the more space-aged looking lamps that were inspired by the exuberance of the post-war optimism. New products such as melamine spattered with chrome and designs that were sleek and sophisticated combined to produce a very forward thinking look.

The great thing about using the vintage retro lamps that your parents loved is that the burnt orange lamp shades or the avocado ceramic lamp stand is now cool again because, well because it's retro.

An important part of putting together a retro room is adding furnishings that follow the retro style. Picking out a fun and funky retro lamp should be enjoyed. Visit Retro Lamps Galore to help put that new retro-style room together.

Bathtub Refinishing Fumes - How To Protect Yourself

Bathtub refinishing is being used more by hotels, apartment complexes and homeowners because of a housing downturn, a mortgage-meltdown, and overall depressed and depressing economy as a way to save money in their bathroom renovation. Another interest in re-glazing is being fueled by informed masses who have shown a continued interest in "greening" their homes, particularly in making them more energy efficient. Consumers are looking for ways to save money, and the environment and that is what bathtub refinishing does- provide savings of up to 80% over replacement while sparing the landfills.

But unlike other services like carpet cleaning, plumbing, pest control etc, where consumers know what to expect from their service contractor, tub re-glazing business is unknown to many. And because of this lack of knowledge, many don't know what the process involves, what to expect and what the the final outcome will be. Here is the bathtub refinishing process in a nutshell: A tub is cleaned, fully etched, cleaned, prime coated andtop coated.

The equipments used are a turbine, a sprayer and a big exhaust fan. The protective equipment is similar to what you'll see used in mold remediation or asbestos removal. If the fumes coming out of the bathroom are not healthy for the one doing the refinishing in the bathroom, do you think it is safe for you, your pets and especially younger and older ones in the home?

Many bathtub refinishing companies will tell you that they use a proprietary coating formulated by them and for them. Ask for their sacred MSDS. It contained enough toxic materials to make their technicians suit up as if cleaning a room full of asbestos. Water based coatings are getting better but water condenses in the bathroom and on the tub. Go figure. Every etching product contain some level of acid. The concentration of VOC's is high. Unfortunately, from the biggest bathtub refinishing companies to the small town bathtub refinishing company using exhaust fans to get rid of the fumes and their smell. They leave a lot of toxic fumes and smell that linger for days.

There are air scrubbers that can suck up those fumes and odors and still keep the environment?
These portable systems operate in a completely sealed off bathroom. They are quiet, so that guests and tenants that sleep on while bathtub re-glazing is done next room. In fact, some companies are using hospital grade air scrubbers while re-glazing a tub because of the importance these companies put on the health of their customers and the environmental impact of their work. These portable units are in the bathrooms where the re-glazing is done.

All the fumes and odors are captured and there is no hoses or cords coming out of the bathroom as a safety hazard. The technology is here. Next time you call your friendly bathtub refinishing company, ask them how they are going to mitigate the odor and fumes. If they are still using old technology with its environmental impact in this century, they are not your company. Ask questions, protect your health, and those of your hotel guests and apartment tenants.

The sluggish economy is forcing hotels and hotel chains, to find creative ways to save money and the environment as they remodel their bathrooms. Many are concerned about the effects of over-spray fumes on their guests and their health, the noise created by antiquated bathtub refinishing systems, the impact of old technology on the environment. Ask questions and lots of them before you hire your next friendly bathtub refinishing company.

Wilson Uche Ukah, is the President of Refinishing Stars, a bathtub refinishing company serving the bathtub reglazing needs of homeowners in Atlanta, Chattanooga, Nashville and Knoxville. Refinishing Stars, refinishes bathtubs, sinks, and countertops for hotels and motels nationwide. Wilson writes regularly on green remodeling and is a consultant to other bathtub refinishing companies. He can be reached at http://www.refinishingstars.com or sales@refinishingstars.com

What To Think About With A Bathroom Remodel

When you are considering a bathroom remodel, there are several things that you need to think about before you get started. Although the bathroom is small, remodeling the entire room is a large task. You will need the help of various skilled professionals and you will need to be sure that no mistakes are made. Even small mistakes can be a large problem later. Think about these things before getting started.

Have You Thought Of...

Perhaps the first thing to consider with a bathroom remodel is just what the new room will look like. What dimensions will it have and where will the features in the room be placed? Will you add windows, skylights or other fixtures? Making significant changes like this can be amazing, but they will be difficult to do as well as costly.

Time is another factor in a bathroom remodel. A good plan before getting started is to consider a schedule for the process of remodeling. Be sure that you realize that you will need to do the work around your every day life. What's more, if this is the only bathroom in the home, it could make for a problem. Where else can you use the bathroom while you work on this remodel?

Next, realize that you need to find the right professionals for the job. They should be licensed and qualified to work in your home. Be sure that they are insured as well. You also want to be sure that you are clear on what needs to be done and how it will be done by the professional. A contract is a necessary tool to use to convey these needs.

What Could Happen?

The bathroom remodel will go smoother if you plan for potential problems. Hiring a qualified professional is a good way to help you to avoid having to too much work, to make costly important steps or even to pay too much for the process. You need to look at the basics of the design and work from there including the cavity space, the ceilings, the walls and even the flooring in the space. Plumbing must be taken into consideration as well.

Should you take on this work yourself? For your bathroom remodel to be successful, you need to be sure that you can handle the renovations that are needed. In most cases, hiring a professional to do the work for you is a very important part of the process. This will eliminate many of the problems that you will face.

Adam Peters contributes editing long articles on decorating for http://www.home-decorating-reviews.com A focused website that offers the best articles on painting bathroom tiles and home interiors.

Thursday, August 27, 2009

Don't Let Your Roof Repairs Go Sky High!

Before you go to the expense of calling in a roofing contractor, see if you can analyze and repair your roof problem yourself. The best possible time to repair your roof problem - is as soon as you realize that you have one and if the weather is calm enough to climb up onto the roof. In fact, this could be further qualified by saying that the best and most economical way to a trouble-free roof, is to inspect the roof regularly, so that you see the problem developing.

A leak from one dislodged tile is a small and inexpensive matter, but if you do not inspect your roof regularly, this will go unnoticed. By the time that you DO notice it, it may be because water is dripping into your spare room! This means that this whole area of the roof structure is soaked, the ceiling will need to be replaced and hopefully the flooring will recover.

Always check your roof after a wind storm, as most roofing is not designed to withstand fierce winds. Scrutinize the tiles for cracks, splits and torn-off corners; also check for lifting. Lifting is a common cause of roof leaks, and can be easily rectified. Be aware of multiple tiles lifting, as this could be a sign that the roofing material is too old and is warping from all the weathering.

Climb into your attic/loft and ensure that any insulation that you have in your roof is not right up against the roof itself. There has to be a gap for air to circulate; also when a roof heats up and there is insulation directly behind it, this heat is thrown back into the roofing and excessive heating like this can damage and warp the roof.

Another weakness in all roofs is the flashing. Flashing is designed to provide a watertight junction between roof materials and structure, especially if the roof projects out or changes design (as with extension roofs). If you are installing a new roof, it is worthwhile to get the flashing 'inspected' as it is a common failure area.

Often the simple fact that the gutters, leading into down pipes from the roof, are blocked with leaves and twigs can cause a problem. Roofs must have adequate run off, especially in the areas which may have snow. Water trapped in the gutter will mean that it will back up the roof for a few inches and have time to seep into the edges of the roofing tiles. Not all homes have adequate perimeter protection on their roofs, although this is one good feature to ask for on a new roof.

Quite often homes incur roof leaks all at the same time (often after strong gales winds and torrential rain etc). This can mean that all contractors are busy and you have 'stop up the leak' until you can get help.

If you do get a leak, and you have placed buckets under the dripping water, be aware that the leak may be in a completely different place than it would seem. Locating the source is difficult, as water can run along horizontal timbers and appear to be leaking from a place that is sound. Getting up into the attic and actually looking for a wet spot on the roof decking will be an accurate way to tell.

If you can find the spot an emergency patch can be made applying roofing felt and using plastic cement to hold it until you can call in a contractor. You can also attempt to repair it yourself, if it is just a shingle that is damaged. You can carefully prize up the roof shingle by removing the three or four nails that are holding it in place; next, apply a generous coating of tar beneath the tear in question, and also coat the underside of the shingle with a with a coat of tar before putting it back in place. Add a spot of tar to each nail head. Most roofing companies advise against the 'liquid' asphalt repair products.

Roofs can also be temporarily repaired using roof membrane and sealants. Care must be taken to clean the roof surface first to ensure that the sealant will stick and keep the leak protected from rain etc. In fact, as long as the roof is clean and dry, the wonder of the 20th. Century - duct tape - can also be stuck onto the roof!

Virginia Wherland is an experienced Minneapolis real estate agent. Virginia and her team can help you find the property you need in the Eden Prairie real estate market. Get more information at AssociatesRealty.net

Decorate on a Budget With Discount Bathroom Vanities

When it comes time to redecorate you will want to set your budget and stick to it. There are many places you can cut costs, and one is with discount bathroom vanities. Purchasing a discount bathroom vanity can help you to stretch your budget, possibly even enough to allow you start on another room when you are done redecorating the bathroom.

Often discount vanities have a small flaw, usually because they are floor models. These are cosmetic and do not take away from the basic function of the vanity in any way. Many times you can use a little paint or take time to sand a small scratch and you end up with a nice, expensive looking, good quality piece for a very affordable price. Here are some tips to help you find a discount vanity as well as other discount pieces:

1) Buy from a private party-- Often when friends and family remodel they change everything, including the vanity. If you know someone who is getting a new vanity they may be willing to let their old one go for a discount price (some may even give them to you if you are close enough). There are many people who purchase a home and remodel and then sell their vanity at a garage sale or flea market. Look for these sales in local newspapers.

2) Clearance sales at Home Improvement Stores-- As stores rotate their stock you will often be able to pick up excellent bargains. It is not unusual to find items marked as much as 75% off (or more) when new stock is on its way in. These items are occasionally scratched, but more often than not there is nothing wrong with them besides the fact they are last season's model. By purchasing your vanity during the non-peak seasons and during times the stores are rotating their stock you can end up saving a bundle.

3) Discount Warehouses-- These stores are specifically designated stores for out of date/off season stock as well as slightly damaged freight. You can often find bargain prices that result in you getting what you wanted at less than half of what you would have paid retail. You will want to check over each item before you purchase it to make sure it isn't damaged badly enough to render it useless. For the most part, these warehouses sell sound merchandise at a fraction of the cost.

4) The internet-- One of the most convenient places to shop is online. There are many stores and auctions available if you take the time to surf for the best price, and you can easily save yourself enough to be able to redecorate your bathroom as well as another room in your home with what it would have normally cost. Bathroom vanities are available in thousands of stores online. You need to remember when you are thinking about making a purchase that you want a reputable seller. You probably don't want to spend a large amount of money if the deal sounds too good to be true or if the person is evasive when you ask questions. Keep shipping charges in mind too, they will increase your out of pocket costs. Some places offer free shipping.

Keep in mind a bargain is only a bargain if it truly saves you money and is usable. If you save hundreds of dollars by spending hundreds of dollars on trash you won't be happy. Making sure all of the measurements have been taken and checked is also important. Making a purchase only to find out the vanity won't fit is no fun either.

For more information on bathroom vanities visit http://www.bathroomvanitybuzz.com - check out our review on Asian Bathroom Vanities.

Wednesday, August 26, 2009

Making Slip Covers

Slip covers offer many excellent opportunities for introducing color and pleasing design into a room that would otherwise appear dull and cheerless. They add an informal atmosphere in either summer or winter months and also serve for recovering shabby or uninteresting furniture that does not harmonize with the other decorations.

There are two types of slip covers to be taken into consideration; the temporary ones used during the summer months, and the permanent ones that form part of the decorative scheme of a room and remain on all the year. It is proper taste to use them all through the year provided they are well tailored and fit snugly over the piece of furniture and the material harmonizes with the decorations already existing in a room.

When choosing material for slip covers, the character of the room should he considered as well as the type of the chair or sofa to he covered. In general, as far as the pattern is concerned, the same principles should be applied as when selecting any other type of upholstery material.

The laws of harmony and contrast should be considered, particularly when designer window toppers are taken into consideration. As a rule, slip covers should be made of the medium weight fabrics, such as glazed and unglazed chintzes, plain and printed linens, cretonnes, plain and striped taffetas, satins, sateens, silk and cotton repps.

Other materials which are often suitable are mohair, plain and striped poplins, ginghams and crash. Patterned fabrics may be found in practically all of the above mentioned weaves to harmonize with historic or modern period types of rooms, formal and informal.

Where economy is to be considered, and no particular style is to be adhered to, there are many varieties of inexpensive cretonnes with all-over flower patterns which are always in good taste. Checked ginghams and percales are smart and effective for covers for small boudoir chairs and can be found in striking color combinations. Such designs are also appropriate for covering French Provincial and quaint Colonial chairs.

For sun porches and semi-outdoor rooms, awning striped material is very durable and it makes striking and colorful slip covers. There are also waterproof glazed chintzes and rubberized materials which are practical for such rooms. For the purpose of obtaining unity in a room, the furniture covers are often of the same material as the curtains and even the picture frames.

In many instances colorful glazed chintz that has been chosen for the curtains may be repeated in slip covers for one or two chairs or a sofa with cushions made of a plain material - either plain glazed chintz, taffeta or satin repeating colors appearing in the chintz pattern.

Plain glazed chintz is a particularly good choice for use in rooms where wallpaper has been used and a patterned rug. Slip covers of plain material will be found more attractive when the seams are bound with a contrasting color.

However much may be said in favor of other materials, it is the decorative character and gay colors of flowered chintz and cretonne which gives them first consideration for the purpose of slip covers. Besides the color interest they add to a room, they may also give unity to a color scheme which appears disconnected.

Sarah Martin is a freelance marketing writer specializing in do-it-yourself home improvement, interior design, and fashioning designer window toppers and one of a kind picture frames. For the best in the hardwood moulding industry, please visit http://www.ferche.com/.

Laminate Flooring For the Bathroom

The flooring that you choose not only makes an impact upon the dcor of your room, but it can also affect the budget and your maintenance needs. Laminate flooring is one flooring choice that is wonderful for bathroom renovations. It comes in many different colors and styles, to allow you to find just the right look for your bathroom to turn it from boring and dull to extravagant and inviting. It is not just beautiful, however. It is also easy to clean and take care of, which is why many homeowners turn to laminate flooring for their homes. There are other benefits to adding laminate flooring, too.

If you are a do-it-yourselfer, then you will be happy to know that laminate flooring can easily be installed by you. Laminate can be installed over most existing flooring or over a concrete subfloor, which will save you time and energy in the installation process as well. It is a floating floor, which means that no glue or nail is needed because the pieces "float" on top of the existing flooring. The pieces lock together to create a cohesive and strong floor that will withstand wear and tear, giving you a durable and beautiful floor that you will enjoy and be satisfied with for many years. All you need to do is click and lock the pieces together and you will have a beautiful, inexpensive floor for your bathroom renovation or other room's renovation.

You want to take the health needs of your family into consideration when choosing your flooring, too. If you or a family member suffers from allergies or asthma, you will be happy to know that laminate is one of the easiest floorings to keep clean and healthy for you. It only needs to be vacuumed and/or damp mopped to help keep it dust and dirt free. It stays shiny without time consuming waxing and if you happen to scratch it, you can easily repair it. Most laminate flooring manufacturers include directions for caring for your laminate floors to keep it looking as beautiful as possible. Laminate is dust resistant and does not harbor any bugs that could cause an allergic reaction as well.

You can use laminate flooring in any room in your home. This is what makes it such a great choice. Kitchen and bathroom renovations are excellent choices for laminate flooring, simply because laminate holds up well to the activity that takes place in these much loved rooms. It stays looking beautiful and shiny with very little effort, too, which makes it great for any home. Laminate flooring will also work well in the living or family room. Adding the warmth of a wood grained laminate flooring can help to add just the right touch of welcomeness and warmness that you have been looking for.

No matter what color or type of flooring that you have been considering, you will want to check out laminate flooring. It comes in many different styles and designs from casual to extravagant to allow you to create the perfect look and feel for your room and your home.

Leroy Calstard very often creates publications on ideas corresponding to husky compressor and husky compressors. You can have a look at his publications on husky tools and husky compressor at http://www.insidewoodworking.com

Tuesday, August 25, 2009

Bathroom Lighting Fixtures - How to Choose For Your Remodeling Project

When thinking about a bathroom remodeling project, there are many things to consider. One of the most important items you will need is light fixtures. Keep in mind there will be differences in your project depending on if you are working with an existing home or a brand new home. If you are remodeling an existing home, your lighting requirements for bathroom light fixtures may be different than if you are building a new home. For instance, in an existing home, there will likely be elements in place that dictate the basic style of bathroom vanity you need to choose. Or there could be a decorating style across the rest of your home that you want to continue into the bathroom.

Start by searching the internet to view vast array of light fixture styles available through the many different lighting retail websites. Your choice is important because the way you choose to decorate will need to last for many years and should reflect your personal style. Now is also the time to formulate your budget. Be mindful of costs while shopping and keep your budget updated so you know where you sit. This will assure that you are able to do all of the things you want to in creating a comfortable bathroom.

The size of your bathroom will determine a large amount of your project. It will dictate the style of the bathroom vanity that you choose and the amount of lighting you will need. If the room is small, choose a single sink vanity. If you have a larger space to work with, consider a double sink vanity. The double sink provides additional surface and storage space, and also creates personal space for the people that use the room.

If you are working with a small bathroom, you can create the appearance of a larger space by using light colored paints, selecting a narrow vanity with under-sink storage, and by using mirrors to help create the feeling of more space. Do this by selecting a large mirror that adds dimension.

If you are working with two bathrooms, consider decorating one with a feminine style and the other one with masculine dcor. For a feminine look, use soft light colors for the bathroom vanity and walls, and for the masculine bathroom use strong, dark colors and wood finishes.

The bathroom light fixtures are extremely important to the overall mood in the room. Be sure to work out the electrical wiring for your light fixtures. If you have experience in household wiring you can tackle this project yourself. If you do not have the skills for this, call a professional electrician or select a lighting retailer that can offer you assistance. If you hire out, get at least three quotes so that you can compare the prices. You can find these electricians by going to your computer and searching the internet.

The primary use of a good vanity light fixture is to provide correct lighting for your grooming activities. These lights are placed above and or on the sides of the vanity for good lighting. Often times, the vanity lighting needs to light the entire bathroom, so be sure to choose a fixture or fixtures that you are sure will accomplish this task. Soften the lighting affect in your room with frosted or beige colored light bulbs or by selecting frosted shades for the bulbs. Many lighting retailers have a large selection of shades from which to choose.

When you tackle a project like a bathroom you must do so by sitting down and planning first. The most critical part of your bathroom remodeling project is selecting the light fixtures and the vanity. Everything else will complement these main elements. The floor covering, the walls, the shower and tub colors, and small decorative items you choose will make your bathroom much more appealing and comfortable if you spend the time in the beginning to think through your entire bathroom remodel plan.

Julia Ritzenthaler is Owner of boutique multiple online furniture stores, For more information about unique bathroom vanity ideas, visit us online or email us with your questions at uniquevanities@msn.com.

Wednesday, August 19, 2009

Oscoda Beach Lodgings

Oscoda is located on the Michigan shores of Lake Huron and is one of the top vacation destinations for the lake. As you might imagine, there are plenty of Oscoda beach lodgings in the area.

Oscoda Beach Lodgings

Oscoda, Michigan is located on Lake Huron in the AuSable area of the state. This area is great for those vacationers who want to stay in an area full of beaches and beautiful wilderness, all within a reasonable drive from Detroit, Michigan. Oscoda is home to a two lane 22 mile paved roadway named River Road National Forest Scenic Byway. This Byway is meant to be enjoyed by car, and is a great place to start your Oscoda trip.

While you're driving along the River Road National Forest Scenic Byway, you can stop at the Lumbermens Monument Visitor Center, which centers on the theme of early logging days in the area and provides a great place to have a picnic. You could also stop at Eagle's Nest Overlook, home to a pair of bald eagles, which is one of the most well-known and beautiful overlooks of the Huron National Forest area.

When choosing a place to stay at, take a look at the many Oscoda beach lodgings. Barefoot Beach, located four miles north of Oscoda, sits on 200 feet of sugar sand beaches along Lake Huron. This destination offers eight cottages, each of which are equipped with a kitchen and TV, and seven of the cottages house two bedrooms. Also available at Barefoot Beach are a playground, volleyball court, horseshoe court and bonfire pit. All of these cute cottages face the beautiful view of Lake Huron and the beach.

If you are looking for more luxury out of these Oscoda beach lodgings, try the Manor House - Oscoda. Located nestled between Lake Huron and AuSable River, this luxury destination offers such amenities as breakfast delivered to your room and river or lake views. Some rooms have fireplaces, private decks and cathedral ceilings as well, to add to the sense of opulence found here. Rooms are decorated in various sea and water themes, making your beach getaway complete.

Choosing to stay at one of the Oscoda beach lodgings can make your trip to Lake Huron and the AuSable area a beautiful and restful vacation. All of these lodgings offer amenities and views of beaches and water that are sure to please, whether you're traveling to the area with your family or on a romantic retreat.

Richard Rspad is with ResortSpaDestinations.com - reviews and articles on resorts. Visit us to read spa articles as well.

Broken Fire Hydrant Home Damage
Water Stains On Shingles

Extend Your Home Without Building an Extension!

If your home is starting to feel a little bit too small but you cannot afford to move at present, it can feel as though you are stuck for space. But there are solutions that can greatly enhance your home without having to go to all the expense of building an extension.

The other problem with an extension of course is that you may not have enough room to make one practical. If you are in this situation now you might want to think about having a veranda built instead, because if it is done properly and designed with care and attention it can really transform your whole house.

The first step is to take a good look at the outside of your home and think about the amount of space you could give over to a veranda. It doesn't need to be a perfect square or rectangle either - if you have space along one side of your house as well as at the rear, you could create an L shaped veranda that 'hugs the house'. This can look stunning when it is finished and the ground is done to your chosen design as well.

The secret of a good veranda is that it almost becomes another room. The roof transforms what was previously just a part of the garden into a sheltered area where you can put a table and chairs for entertaining. You could even use it as an outside office when the weather is nice enough! Just imagine sitting outside with your laptop and enjoying a cool iced tea while you finish typing that report.

It's important to think about how you would use your verandah before you decide on the final design or size you are going to opt for. For example, if you plan to use it for entertaining you will need to make sure it is big enough to accommodate the table and chairs you have in mind. You might also want to use a sun lounger to relax in the shade, but if the veranda is too small then you won't be able to use it like you had intended.

Just as with any other room in your house, you can add some decoration to your verandah as well. You could paint the walls of that part of your house a slightly different colour perhaps, or simply add some colour by putting a number of hanging baskets, pots and troughs filled with flowers around the structure itself.

All these things help to mark out the area as being separate from the rest of your house, and even as a separate area when compared to the rest of your garden too.

All in all a veranda is excellent value for money and one of the easiest ways to completely alter the mood and feel of your property. No matter what style house you have, you will be able to find a verandah that will fit right in and look as if it was always meant to be there.

Install-a-Veranda is Australia's leading supplier and installer of verandas, patios, pergolas and carports. For a free consultation please visit Pergolas.

Roof Fascia Section Repair
Plants Growing In Sidewalk

Tuesday, August 18, 2009

Best Material to Be Used in the Bathroom

Everyone wants to live in a big house, which looks grand and beautiful. Though the bathroom is a small room, which you cannot personalize a lot or add a lot of furniture, there are numerous ways of making it look pretty. A simple way to do this is by using good materials for your bathroom. You have got to find and choose the best material to make your bathroom look more splendid. Here are some of the best materials to be used in a bathroom.

Material for the Countertops

You could start by deciding what material should be used for your countertop. There are many choices available from which you can choose. Before settling on what type of countertop you want, you must take into account factors such as its price, durability, maintenance, style and installation. Having a countertop in your bathroom is a must. You must decide on a countertop material, which is not affected by water, that is considering the humidity and water in the bathroom. Bathroom countertops are usually customized however nowadays you can even get yourself pre-made countertops. Some of the best materials that can be used for your countertop are marble, laminates, tiles, granite and soapstone.

Material for the Bathtub

Next you can decide on the type of bathtub, whether you want a luxury bathtub or an old fashioned one. Later on you can decide on the material for your bathtub. Again there are a number of materials to choose from while deciding on the material to use for your bathtub. Each of these materials have there own advantages and disadvantages. Even though these materials may be quite superior and good in quality, you must remember that over time they will be damaged due to use. Some suitable materials you can use are acrylic, marble, fiberglass, cast iron, enameled steel or porcelain on steel and solid surface.

Material for the Bathroom Walls

Selecting the material required for your bathroom walls is quite a task what with the endless number of options that are now available to you. But you must remember to make the right choices. You must consider certain factors such as it should be water resistant, easy to clean and durable. Also each material has its pros and cons that you must keep in mind before deciding on the final material. Some materials which are most commonly used and are the best to use for your bathroom walls are tiles which are available in a wide variety, fiberglass, acrylic sheet materials and marble and natural stone tiles. These come in a variety of sizes and colors to choose from.

Material for the Bathroom Floor

There are many options available when picking the right flooring for you bathroom. However you must keep in mind how the material handles moisture, whether it is durable or not and how the particular style will suit your bathroom. Materials that can be used are laminates, tiles which come in a wide variety of styles and surfaces and also vinyl flooring.

Keeping all these suggestions in mind you can now decide on how to remodel or design your bathroom according to your preferences.

Marble City Company is the leading installer and largest importer of granite slabs in the Bay Area, California.

Holes In Floor Joist
Shaky Garage Door Track